上海飞机牌铸308铸铁焊条Z308铸铁焊条
category | trade- | e to china standard | characteristics & application | e to aws |
hard-surfacing 硬 面
堆
焊
| d 667 | edzcr-b-15 | hrc≥48. resistance to wear, gas corrosion and oxidation. hardfacing of blast furnace hopper and cracker part. | |
d 802 | edcocr-a-03 | hrc38-47. resistance to heat, wear and corrosion. hardfacing of high temperature part such as the edge of thermo-cutter. | ecocr-a | |
d 812 | edcocr-b-03 | hrc45-50. resistance to heat, wear and corrosion. hardfacing of high temperature part such as internal-combustion engine valve. | ecocr-b | |
d 822 | hrc≥53. resistance to wear and heat, bad shock resistance. hardfacing of rotating blade wheel of boiler. | |||
d 832 | edcocr-c-03 | hrc≥50. wear and heat resistance. hardfacing of high temperature part such as hot-rolling guided way. | ecocr-c | |
d 842 | edcocr-d-03 | hrc28-38. corrosion and thermo-fatigue resistance, work harding. hardfacing of hot forging die. | ||
cast iron
铸
铁 | z 308 | ezni | pure nickel, excellent general properties. used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool. | eni-cl |
z 408 | eznife | iron nickel, high strength and excellent ductility. repair welding of important gray cast iron and nodular cast iron, such as cylinder cap. | enife-cl | |
z 508 | eznicu-1 | copper nickel, good machinability and bad crack resistance. repair welding of sand hole and gray cast iron machined surface subject to no load. | enicu-b | |
copper alloys
铜
合
金 | cu 107 | ecu | red copper, atmosphere and sea water corrosion and excellent electric conductivity. welding of red copper such as electrical copper row. | ecu |
cu 207 | ecusi | silicon bronze, corrosion resistance and high strength. welding of copper, silicon bronze and brass. | ecusi | |
cu 227 | ecusnb | tin phosphor bronze, corrosion resistance and high strength. welding of copper, silicon bronze and brass. | ecusn-c | |
cu 237 | ecual | aluminum bronze, wear and corrosion and high strength. welding or surfacing of copper alloys. | ecual-a2 | |
aluminum alloys
铝 合 金 | al 109 | tal | pure aluminum, excellent corrosion resistance and middle strength. welding of pure aluminum. | e1100 |
al 209 | talsi | silicon aluminum, good crack resistance and wide range of usage. welding of aluminum alloys other than aluminum magnesium alloys. | e4043 | |
al 309 | tamn | manganese aluminum, corrosion resistance and high strength. welding of aluminum alloys. | e3003 | |
nickel alloys 镍合金 | ni 102 | eni-1 | pure nickel. welding and surfacing of nickel and nickel to steel. | eni-1 |
ni 207 | enicu-7 | copper nickel. welding and surfacing of copper nickel and copper nickel to steel. | enicu-7 |
category 类别 | trade 牌号 | chemical composition 主要成份(%) | characteristics & application 特性和用途 | e to aws 相当aws |
hardfacing
硬
面
堆
焊 | s 101 | c3 cr28 ni4 | hrc48-54. resistance to wear, gas corrosion and oxidation. hardfacing of bucket tooth and case pump. | |
s 111 | c1 cr29 w5 | hrc38-47. resistance to wear and corrosion at high-temperature. hardfacing of high temperature and pressure valve. | ecocr-a | |
s 112 | c1.5 cr29 w8 | hrc45-50. resistance to wear and corrosion at high-temperature. hardfacing of valve and hot-rolling pass. | ecocr-b | |
s 113 | c2.5 cr30 w17 | hrc≥55. wear and heat resistance at high temperature, bad shock resistance. hardfacing of screw charging carriage. | ||
s 114 | c2.5 cr30 w12 | hrc≥53. wear and heat resistance at high temperature, bad shock resistance. hardfacing of three-cone bit. | ecocr-c | |
copper alloys
铜
合
金 | s 201 | sn1 si0.3mn0.3 | good mechanical properties and crack resistance. gas welding and argon arc welding of red copper. | ercu |
s 211 | si3 mn1 | good mechanical properties. argon arc welding of copper alloys and mig brazing of steel. | ercusi-al | |
s 212 | sn5 cu rem. | wear resistance. argon arc welding of copper alloys and surfacing of steel. | ercusn-a | |
s 213 | sn8 cu rem. | ercusn-c | ||
s 214 | al7.5 cu rem. | wear and corrosion resistance. argon arc welding of copper alloys and surfacing of steel. | ercual-a1 | |
s 215 | al9 cu rem. | ercual-a2 | ||
s 221 | cu60 sn1 si0.3 | melting point is about 890℃. gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. | ||
s 221f | cu60 sn1 si 0.3 | s221 welding rod coated with flux. | ||
s 222 | cu58sn0.9si0.1 | melting point is about 880℃. gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. | rbcuzn-c | |
s 222f | cu58sn0.9si0.1 | s222 welding rod coated with flux. | rbcuzn-c | |
s 223 | cu59 sn0.6 | melting point is about 900℃. braze welding of copper, steel and cast iron. | rbcuzn-a | |
s 224 | cu62 si0.5 | melting point is about 905℃. gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. | ||
copper 铜
合
金 | s 225 | cu48 ni10 | melting point is about 935℃and high strength. braze welding of steel, nickel and carbide alloys. | rbcuzn-d |
s 225f | cu48 ni10 | s225 welding rod coated with flux. | rbcuzn-d | |
s 226 | cu60 sn0.3 | melting point is about 900℃. gas welding of brass, also braze welding of copper, steel and cast iron. | ||
s 227 | cu58sn0.9ni0.5 | melting point is about 880℃. gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. | rbcuzn-b | |
s 229 | cu55 ni6 mn4 | melting point is about 920℃, high strength. braze welding of steel, nickel and hard carbide. | ||
aluminum alloys
铝
合
金 | s 301 | al≥99.5 | good ductility and corrosion resistance. gas welding and argon arc welding of pure aluminum. | er1100 |
s 311 | si5 al rem. | corrosion resistance, wide range of usage. gas welding and argon arc welding of aluminum alloys other than high magnesium alloys. | er4043 | |
s 321 | mn1.3 al rem. | good corrosion resistance, weldability and ductility. gas welding and argon arc welding of aluminum alloys. | ||
s 331 | mg5 mn0.4 | corrosion resistance and high strength. argon arc welding of aluminum alloys. | er5183 |
斯米克钎焊料分别有:(铜锌钎焊料),(铜磷银基钎焊料),(铝基钎焊料),(锡铅钎焊料),(镍基钎焊料).简介如下:
category | trade-mark | specification | melting | chemical | application
| e |
copper 铜锌 | l103 | wire & rod | 885-888 | cu54 zn rem. | brazing of copper, bronze and steel, subjected to low load. | |
l104 | foil | 890-930 | cu57 mn2 | brazing of carbide cutting tool. | ||
copper
铜磷 | l201 | cast rod, wire & rod, powder | 710-800 | p7 cu rem. | brazing of copper and copper alloys. | bcup-2 |
l204 | cast rod, wire | 640-815 | p5 ag15 | brazing of copper, copper alloys, silver and molybdenum etc. | bcup-5 | |
l205 | cast rod, wire & rod, powder | 640-800 | p6 ag5 | brazing of copper and copper alloys. | bcup-3 | |
l207 | cast rod, wire & rod | 640-770 | p7 ag5 | brazing of copper and copper alloys. | bcup-7 | |
l209 | cast rod, wire | 684-710 | p7 ag2 | brazing of copper and copper alloys. | bcup-6 | |
silver
银基 | l302 | wire & rod | 745-775 | ag25 cu40 | brazing of copper, copper alloys, steel and stainless steel etc. | |
l303 | wire & rod | 660-725 | ag45 cu30 | brazing of copper, copper alloys, steel and stainless steel etc. | bag-5 | |
l303f | flux coated rod | 660-725 | ag45 cu30 | l303 coated with flux, the same application as l303. | bag-5 | |
l304 | foil | 690-775 | ag50 cu34 | brazing of copper, copper alloys and steel etc. | bag-6 | |
l308 | wire & rod | 779-780 | ag72 cu rem. | brazing of copper and nickel under vacuum or reducing protective atmosphere. | bag-8 | |
l312 | wire & rod | 595-605 | ag40.cu.zn.cd | brazing of copper, copper alloys, steel and stainless steel etc. | ||
l313 | wire & rod | 625-635 | ag50.cu.zn.cd | brazing of copper, copper alloys, steel and stainless steel etc. | bag-1a | |
l321 | wire & rod 丝 | 615-650 | ag56.cu.zn.sn | brazing of copper, copper alloys, steel and stainless steel etc. | bag-7 | |
l323 | wire & rod | 665-755 | ag30.cu.zn.sn | brazing of copper, copper alloys, steel and stainless steel etc. | ||
l325 | wire & rod | 645-685 | ag45.cu.zn.sn | brazing of copper, copper alloys, steel and stainless steel etc. | bag-36 | |
l326 | wire & rod | 650-720 | ag38.cu.zn.sn | bag-34 | ||
aluminum base 铝基 | l400 | cast rod, wire & rod | 577-582 | si11.5 | brazing of aluminum and aluminum alloys. | balsi-4 |
l401 | cast rod | 525-535 | si5 cu28 | brazing of aluminum and aluminum alloys. | ||
tin lead 锡铅 | l600 | wire & rod | 183-185 | sn60 sb≤0.8 | soldering of fusible metals and heat-treated part. | 60sn |
l601 | wire & rod | 183-227 | sn18 sb2 | soldering of copper, copper alloys and galvanized iron plain sheet. | 18sn | |
l602 | wire & rod | 183-256 | sn30 sb2 | soldering of copper, brass, copper alloys and galvanized iron plain sheet. | 30sn | |
l603 | wire & rod | 183-235 | sn40 sb2 | soldering of copper, copper alloys, steel and zinc parts. | 40sn | |
l604 | wire & rod | 183-222 | sn90 sb≤0.15 | soldering of copper and steel for food and medicine field. | 90sn | |
l605 | wire & rod | 232-240 | ag5 sn95 | soldering of copper and steel for electrical and food field. | ||
l608 | wire & rod | 295-305 | sn5.5 ag2.5 | soldering of copper, copper alloys, steel and stainless steel. | ||
nickel base 镍基 | l702 | powder | 970-1000 | cr7 b3 si4 | brazing of stainless steel under vacuum or protective atmosphere. | bni-2 |
category | trade-mark | product name | characteristics & application |
gas 气焊 | cj301 | copper gas welding flux | melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys. |
cj401 | aluminum gas welding flux | melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys. | |
silver 银钎焊 | qj101 | silver brazing flux | brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃. |
qj102 | silver brazing flux | brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. | |
qj102a | silver brazing flux | brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. non agglomeration. | |
qj112 | silver brazing paste flux 膏状银钎焊熔剂 | ||
qj103 | silver brazing flux | ||
aluminum brazing 铝钎焊 | qj201 | aluminum brazing flux | brazing flux of aluminum and aluminum alloys within 450-620℃. |
qj207 | aluminum brazing flux | brazing flux of aluminum and aluminum alloys within 560-620℃. |
本产品的品牌是斯米克,型号是Z308,牌号是飞机牌,产地是是,类型是铸铁焊条,材质是镍,焊芯直径是2.5/3.2/4.0(mm),药皮性质是碱性焊条,直径是3.2/4.0(mm),长度是350-400(mm),焊接电流是90-120(A),电流幅度是120-180(A),熔点是500,工作温度是650(℃),适用范围是机械设备加工,硬度HRC是45,加工定制是否
联系方式
- 地址:北京 北京市海淀区地锦路33号院1号楼3层94号
- 邮编:100097
- 电话:13466756138
- 经理/法人:马爱青
- 手机:13661295181
- QQ:742858369
- Email:742858369@qq.com